EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Product Range
- »
- Wooden Lamp
Wooden Lamp
Providing you the best range of rockfort wood glow and renova epilite epoxy finishes with effective & timely delivery.
ROCKFORT Wood Glow
Product Price: Rs 288 / LitreGet Best Price
Minimum Order Quantity: 200 Litre
Product Details:
| Usage/Application | Wood |
| Packaging Size | 4 LTR |
| State/Form | Liquid |
| Packaging Type | TIN |
| Grade Standard | Industrial Grade |
| Finishing Type | CLEAR GLOSSY |
| Brand | ROCKFORT |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
RENOVA Epilite Epoxy Finishes
Product Price: Rs 476 / LitreGet Best Price
Minimum Order Quantity: 200 Litre
Product Details:
| Packaging Size | 20 L |
| Brand | RENOVA |
| Usage/Application | Floors |
| Packaging Type | Drum |
| Finish | High Gloss |
| Paint Base Type | Solvent Based |
| Application Method | BRUSH /SPRAY |
| Country of Origin | Made in India |
Epoxy Finishes PD E221
Renova Epoxy finishes are two pack polyamide cured chemical Resistant coating suitable for application on almost all types of Surfaces where resistance to alkalies, acids and other chemicals is required. This can be used for finishing Metals, Wood, and Concrete Structure in atmospheric exposure conditions. It provides long term Protection of Steel and has outstanding resistance to Mechanical Tear and Wear. It has high resistance to Splash and Spillage of Mild Chemicals and Solvents.
PHYSICAL CONSTANT: -(For Mixed Product)
Finish : Smooth and Glossy
Colour : Oxford Blue, Light Grey, Dark Grey
Solids by Volume : 40 + 2 %
Coverage : By Spray - 10 to 15 m2 per ltr per coat
Drying Time : Maximum 3 Hours at 32.C
Hard Drying 16 Hours
Full Curing : Maximum One Week.
Over Coating Interval : Minimum 7 HoursFlash point : 35. C
Recommended film thickness: 30 + 5 microns per coat
Salt Spray : Min 300 hrs on well treated Panel
APPLICATION DETAILS:-
Mixing Ratio - by Volume: base to hardener 75 : 25 Pot Life at 30. C - 10 Hours 35. C - 8 HoursThinner: - RockFort Thinner EPX – 601
For Brushing - 0 To 5 % For Air Spray - 5 to 10 %SURFACE PREPARATION:-Surface Should be thoroughly cleaned, Free from Rust, Dirt, Oil, Grease and Other Surface impurities Metal Surface should be Sand Blasted or Chemically Cleaned and Prior Coat of Epoxy Chromate Primer can be applied.
Yes! I am InterestedRequest A Callback