- Home
- ยป
- Our Product Range
- »
- Wall Putty
Wall Putty
RUBILUX ACRYLIC WALL PUTTY
Packaging Type | Bucket |
Brand | Rubilux |
Usage/Application | Interior |
Raw Material | Acrylic |
Country of Origin | Made in India |
DESCRIPTION: Rubilux Acrylic Wall Putty is a readymade Wall Putty based on water based Emulsion used to remove surface imperfections, fill up dents and to level the Interior plastered wall surface, asbestos, cement & etc, prior to priming. It provides Excellent Hardness / Adhesion and good Smoothness. It gives a film with Excellent Hardness and adhesion which will not crack or peal off on due course of time. The Smoothness rendered by Rubilux Acrylic Wall Putty will improve the performance of subsequent finish coats like Distemper, Plastic Emulsion Paint and etc. Rubilux Acrylic Wall Putty is available in Bright White Shade which can be tinted with Rubilux Universal Stainer. It is specially formulated for levelling of minor surface irregularities up to 3-4mm. It is only recommended for internal application
DIRECTION FOR USE: Rubilux acrylic wall putty is recommended to use after an application of Rubilux cement primer (w/b) in the newly plastered surface. Rubilux wall putty is supplied in paste form should be applied on the wall by putty blade to fill up the dents and holes in the plastered surface. It can also be directly applied to the primed wall without any addition of water to get the maximum benefit. Depends upon surface ,recoat of putty is necessary. After 4-5 hours of first coat, scrap off the surface with sand paper(220 –320 water emery) and clean the surface. Then second coat of putty should be applied in the previous manner. After 5 hours, second coat of Rubilux cement primer should be applied to get the smooth surface for finish coat.